Air respirators inflatable pump the filling pump compressor in fire protection, industrial, diving, warships, military, first aid field and so commonly used, but the the air respirator inflatable pump air source with the use of gas cylinders. Because, when inflated, the required flow. So, we started in the following details to explain the use of positive pressure air respirator inflatable pump operational processes: use the air respirator inflatable pump, we should use to check the air filter and check the inflatable pump oil liquid level is normal. In the open air respirators inflatable pump power switch should then turn on the power switch of the compressor. Start working, we must pay attention to check the direction of rotation of the compressor is normal, if abnormal conditions must immediately stop check. If the machine was operating normally open condensate drain valve. This close the discharge valve and a pneumatic valve, connected to its cylinder and the pneumatic valve. Then open the valve of the inflatable pump inflatable air respirators, open the cylinder valve, inflatable start. (Note: during inflation, it must be every 15 minutes to open the drain knob emission condensate) when pneumatic pressure gauge rose to 30Mpa, inflatable end. Close the air respirator inflatable pump cylinder valve, close the filling valve and spilled out of the high-pressure gas in the inflation valve. Remove the gas cylinder, turn off the power switch downtime. Relieved the high pressure gas from the inflator valve and condensate discharge valve. Jinan Cheung An electronic prompts you concerned about the health concerns Fire http://www.qitibaojing.net.cn